11/13/2015

WABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic Interface

 WABCO DIAGNOSTIC KIT
A wide range of diagnostic hardware completes the System Diagnostics package: 
easy-to-use blink code plug, digital testers, conformity test unit, adapters and cables, and a complete test bench.

WABCO Diagnostic Software is available for every WABCO-produced component needing diagnosis:
ABS C
ABS D
ABS D+
ABS HPB
ABS SAE
ABS-EAPU
ATC CAN Standard
ATC Coach
ATC KWP Citaro Travego
CAN-Viewer
CDC
EBS 1C Asia
EBS BUS Standard
EBS CBU MAN
EBS EPB Bus
EBS EPB MB Truck
EBS Euro
ECAS 4x2 S2000
ECAS Bus A
ECAS Bus Citaro
ECAS CAN2
ECAS ENR MB Truck
ECAS Truck JED
ECAS Truck KWP K
HBS AddOn-E
IVTM
Modular AMT
MTS
ODR Tracker
OptiDrive (Fast Gear)
SmartBoard
TCE
TEBS-D
TEBS-E
TECAS
Trailer CAN Router-Repeater (TRR)
TrailerGUARD Telematics
VCS
VCS II
ZBR2

weight : 1.8kg net
size : 40cm x 17cm x 8cm 

Software screen
WABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic InterfaceWABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic InterfaceWABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic InterfaceWABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic InterfaceWABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic Interface

Smart Key Maker For Toyota G Chip and Lexus

Top 4 Reasons To Get Smart Key Maker For Toyota G Chip and Lexus

1. This is a 2 in 1 key programmer for Toyota G chip and Lexus smart card.
2. Toyota G Chip and Lexus Smart Key maker no need to install driver software for Toyota, Lexus programmer,
3. security, stability, fast, all with G key Toyota, Lexus Smart Key Programmer SO163 all lost, can be arbitrarily increased 1-3 keys.  
4. No need connect with computer

Notice: It cannot be updated
 
Instruction of How to Use Toyota G Chip and Lexus Smart Key maker
                                                                    
Please try to use ordinary programmer to read 93C66/93C46/93C86 data, save the following way operation.
                                                               
1. Remove the ECU security module, installed in the 93C66 eeprom IC programmer Toyota models corresponding to the transposition.
2. Connect the USB cable to the computer, and then switch to the features Toyota-G position, you can see the relative position of 93C66 the indicator light flashes slowly into the state.
3. Now click on the relative position of the touch switch, indicator light starts to flash at the moment, a few seconds after the light is off, the operation was successful.
4. Replace the 93C66 ECU security module, replace the vehicle anti-theft module is inserted after the first key, anti-theft module indicator light turns off remove the key, and then insert the second key, anti-theft module can be directly after indicator goes out to start the vehicle, completely not synchronous operation, convenient and quick. 

How To Use Lexus Key Programmer:
                                                                 
Note: a match one IC, regardless of the order, do not leave the key sensing area
1. The ECU IMMO module removed, the 93C46 eeprom IC programmer installed in Toyota models corresponding to the transposon
2.  Connect the USB cable to the computer, and then switch to Lexus Key functional position, you can see the relative position of 93C46 LED flashes slowly into the state, put the key into the induction circle
3.  Click on the relative position of the touch switch, indicator light starts to flash at the moment, a few seconds after the light is off, initialization is successful. Replace the eeprom IC EUC security module, replace the vehicle anti-theft module      
toyota G Chip and kexus smart key programmer 2
State:
 Z type machine simply IC pin cleaned with alcohol placed within the transposon, H-type machine choose the IC solder pads on the corresponding

Data Smart3+ Immo Full Package

 Data Smart3+
Data Smart3+ powered by two CORTEX ARM cores, speeds up to 200MHZ., With SD card interface to load and save files, USB port for update by the Internet, 320*240 TFT LCD with 256K colors to show pictures and help files in great detail. Integrated CAN-BUS / J1850 / CCD-BUS / ISO9141 / SPI protocols in one multifunctional interface.
 
Data Smart3+ Features:
 
1. Self-test function integrated within the system.
2. Advanced operation environment, by extended menu and picture guidance.
3. Integrated data backup function to enable safe working procedure s.
4. Log-file function integrated in to soft ware; this will be a step forward in the tools operation and development.
5. Hex editor integrated in to software.
6. Advanced security integrated into hardware.
 
Immo Full Package:
 
Immo full package: Main hardware,Transponder adapter, OBD cables, USB cable, Power cables, with full soft.
software: OBD functions for Immo are all active.
Ford / Mazda: Key learning by OBD2 (not need code) for CAN-BUS cars.
 
4th Generation of VW Immo:
 
1. Make dealer keys by Megamos48 chip (using transponder adapter).
2. Key learning by OBD2 (not need code , not need online).
3. Cover all VW / SKADA / SEAT cars that use NEC+24C64 or NEC+24C32 or Micronas or 9s12xhz512(1M80F) MCU in dashboard.
 
4th Generation of AUDI Immo:
 
1. A6 / Q7 
2. A3 / TT / R8 07-UP