Program Audi Q5 2011 5th IMMO Smart Remote with OBDSTAR X300 DP

How to program smart remote keys on a Audi Q5 year 2011 5th Immobilizer system using OBDSTAR X300 DP and RFID adapter via OBD.

Devices required:

OBDSTAR X300 DP (Key Master DP) full version

VCI interface (included in full package)

OBDSTAR RFID adapter (purchased separately)

1 working key and a new key

Procedure:

Connect VCI with RFID adapter and vehicle

Select Diag Program->Immobilizer->VW/Audi/Skoda/Seat->Audi->Program Keys

Select 5 generation immo->A4L/A5/Q5

Select Read Immo Data

Turn ignition switch to ON with programmed remote
Communicating
Reading immo data

save immo data

Select Show Immo Info
Choose Audi Q5 saved file

OBDSTAR X300 DP will display vehcile immo data VIN, CS,PIN code, key number etc info

Select Make Dealer Key

Put a new key into RFID adapter

If X300 DP display error “failed to connect to RFID”
You must update RFID before make dealer key

How to update RFID firmware?
Go to immo selection menu

Select RFID Update
Updating firmware

Firmware finished, the indicator on RFID turns green
Select Make Dealer Key
Choose saved file
Put a new key into RFID
Write data to key
Write success

Select Program Keys->Open Audi Q5 saved file

after recognized by vehicle, the key will be locked and unable to unlock.
Press YES to continue

Enter key number: 2 and confirm
Turn ignition on and press Enter to go on

Insert 1st key turn on

Key number 1/2 already programmed
Insert 2nd new key and turn on ignition for smart system

key number 2/2 already programmed

Success to recognize keys
Key lean mode completed and success
Try to start all keys