FG Tech Galletto BDM Connection

FG Tech Galletto BDM Connection:

 

FG Tech Galletto 4 Maste Description:

 

FGTech Galletto 4-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone. Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode, checksum.

 

V54 FGTech Galletto 4 Boot Mode System:

 

NEW JTAG - BDM - MOTOROLA - FREESCALE - INFINEON

Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 - Mair 8GMF

New Delphy DCM3.5xx DCM3.7xx TRW

Motorola Freescale MPC 555/556/561/562/563/564/565

Motorola MC 68332 - MC YQQCU - MC 68377 Trionic 5/7/8 GM-OPEL-SAAB

Motorola MC 68376 Campi 01 Lamborghini - Lotus

Motorola MC 68336 MEMS D5 ROVER

Motorola ZC 439615 - ZC 439507 IAW FIAT - VAG

New Line OBD protocols VPM GM - Hummer-Corvette-Munstang-Blazer-Cadilac

New Line OBD protocols Tx-Rx - Subaru - Mitsubischi - Hitachi - Denso ecu

 

V54 FGTech Galletto 4 Automatic Checksum:

 

All old protocols included from Bosch MExx / EDCxx / Marelli / Siemens / Delpy / Lucas / Denso

Boot Mode C167x / ST10, Boot Mode Infineon With password Bosch , Siemens

Motorola MC68332 - MCYQQCU - MC68377 , MC68376 , MC68336, ZC439615 ,ZC439507

Motorola Freescale MPC 555/556/561/562/563/564/565

Freescale MPC 5553/5554/5565/5566

BDM

5-30V Car / Industrial Vehicles, L line / K line KWP, CAN

Can Bus V2.0 50Kb > 1000Kb

J1850 VPW PWM GM -FORD

Rx Tx RS232,

RS 485,

Automatic setup Pull up K-L line 250, 500, 1000 ohm,

Automatic setup termination Can bus 0, 60,120 ohm,

 

FGTech Galletto 4 Master Version:

 

Recovery Mode Completa

Funzione scan tool per eliminare i DTC

Function scan tool for erase the DTC

Controllo tensione di batteria auto in tempo reale

Check tension of battery car in real time

XPROG-M V5.5.5 Authorizations

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014

XPROG-M V5.5.5 Adapters:

 

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

Additional adaptor for 5M48H P-Flash

UPA-USB Device Programmer V1.3

UPA-USB Device Programmer V1.3 Update Info:

 

Added MC9S12HY64/HA32 support

Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A

Added 24C1024, 24C1025 support

Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675

Added script function GetPage

Added script function AutoBaudRateDevice (hc08 devices only)

Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl

Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;

Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs

Fixed bug with SetHC08SecurityBytes (SecBytes: string) function

Fixed bug with 68hc11 reading if Oscillator is not set to Auto

Updated script example files

The software is digitally signed

USB driver upausb.sys is digitally signed

 

New Added Function:

 

Added MC9S12HY64/HA32 support     

Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B,
S25FL004A/008A/016A/032A/064A   + Added 24C1024, 24C1025 support     

Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675     

Added script function GetPage     

Added script function AutoBaudRateDevice (hc08 devices only)     

Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl     

Added script function EnablePicMemoryAreas( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;     

Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs     +Fixed bug with SetHC08SecurityBytes(SecBytes: string) function      

Fixed bug with 68hc11 reading if Oscillator is not set to Auto    
Updated script example files     

The software is digitally signed     

USB driver upausb.sys is digitally signed and can be used with 64-bit windows XP/Vista/7

 

STMicroelectronics ST62*: ST6240, ST6245, ST6249

 

NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9

for Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*,MC68HC05X16, MC68HC05X32

for Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A

for Motorola HC11*: MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8

for Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128,
MC68HC912DG128A

for Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256

Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253

Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313

Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675

Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)

EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01

EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46

EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045

EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102

*EEPROM Only

 

NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974

 

TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912

 

TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006

USB KKL VAG-COM 409.1 for VW/AUDI Support vehicles？

USB KKL VAG-COM 409.1 for VW/AUDI

Support vehicles:
1.Audi Models: 
1)Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
2)Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
2.SEAT Models: 
1)Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
2)Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
3.Skoda: 
1)Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
2)Not Compatible: Octavia (1Z)
4.VW: 
1)Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
2)Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton /

Specification:
Manufacturer Ref: C44D47A6AF72
Catalog Ref: Car accessories, cable fault code, VAG-COM, OBD2 cable

Other Features:
Also supports ISO9141 protocol
No DC or alternate power supply needed, just connect to your car and computer
Work with most Volkswagen and Audi models sold worldwide from 1994 to current year
The CVFG-A11 cable cannot work if your car uses a protocol bus system like VPW, PWM or CAN -bus
The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

Key Features of the Mangoose JLR for Jaguar & Land Rove

J2534 and J2534-1 compliant device driver

Commercial Range (0 to +70℃)

Dimensions: 3" x 1.75"

Operating Voltage: Bus-powered by USB

Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver

Lost cost, high performance pass-thru diagnostic tool for use with PC

USB Diagnostics tool for CAN and ISO9141 vehicles

Supports reprogramming for Jaguar 2005& up, Land Rover 2005 & up.

Simple packaging with electronics contained inside the cable.

Bus Protocols Supported By the Mangoose JLR for Jaguar & Land Rover

CAN Bus (details published soon)

More details published soon, will work with IDS 125 software subscription for dealer level diagnostics & module programming. 

Diagnostics with the Mangoose JLR for Jaguar & Land Rover

The Mangoose JLR is a USB pass-thru device that utilizes the SAE J2534-1 API. What this means is that the Mangoose JLR uses a standard communications interface to the vehicle, allowing it to work with 3rd party diagnostic applications. Different diagnostics and data logging applications supported are currently supported by the Mangoose, with more being added all of the time.   NEW!  Jaguar / Land Rover are now supported for dealer level diagnostics & module programming using their software (available here) and the Mangoose JLR. This includes 2005 & Up Jaguar and 2005 & up Land Rover,and requires a subscription to IDS version 125 & up. 

What you have to pay attention when using Mongoose Diagnostics and Reprogramming Interface

Mongoose Diagnostics and Reprogramming Interface for Toyota TIS V9.10.038 +honda HDS + Volvo Dice

1. Your computer must be windows XP system.
2. Please choose area EUROPEAN when you installing the software. Then it will not ask you for activation code.
Features：
1.       Fully compatible with Toyota TIS, Honda HDS and VOLVO DIDA (New!!!) 
2.       Supports Diagnostics, Reprogramming, Active tests, and key programming 
3.       Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics 
4.       Fully compatible with SAE J2534 
5.       Programmable power supply 
6.       Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector 
7.       Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connecto8.       RGB status LEDs

Supported Protocols
K-Line ISO 9141 
KWP 2000 ISO 14230-4 
SAE J1850 PWM 
SAE J1850 VPW 
CAN 2.0B ISO 11898 
CAN ISO 15765-4

New Arrival I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device

New Arrival I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device

1. J2534 2014-1 Version Software Free Download (Do not connect with internet, and before you install the software, follow our video to install software and driver correctly)

2. I-2014V Multi-Diag Access J2534 needs activation, after installing the software pls send ID (format is 31-xxxxxxxxxxx) to us, we will send the activation code.

Installation Multi-diag 1-2014:

 

1). Open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message "successfully installed XXXXXX" and click "OK"

2). Start the installation folder (2) 1-2014 During your installation, if the software request an unlock key 31-xxxxxxxxxx, please contact us with the key to obtain an activation code. 

3). Select the language, then it will continue to install,  please wait until the software complete installation, usually it will take about 30 minutes to 2 hours, how much time to wait it depends on your computer configuration. When the message display saying "Multi-Diag is currently installed with profile ACTIA. Before you can use the program, you must restart your computer." Click "No, I will restart my computer later" and click "Finish" 

4). Go to the following folder C: \ ACTIA \ portal and then delete the file "WEGT.EXE", and clean "Recycle Bin" 

5). After delete this file, open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message saying "successfully installed XXXXXX" and click "OK" 

6). Then install "xs-ime-pt-207p-workshop.exe".  At the step, please connect the device to the car, then use the USB cable to connect with the computer, then it will prompt to install Pass Thru driver.

7). Go to My Computer - Properties - Hardware - Device Manager, when you find PC- 201411261510 - I+ME ACTIA XS Device and PassThru+ XS USB Driver, it means Multi Diag Access has successfully establish communication with the computer.

Then you can restart the pc.

 

Multi-Diag J2534 Functions:

 

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

 

1. Maintenance

 

Diagnosis codes from all computers

Reset maintenance interval

Modification of the sewage

Read / erase fault calculators

Maintenance of the particulate filter

 

2. Air Conditioning

 

Diagnosis of cooling electronic

Reading settings cooling circuit,

Test servo actuators

 

3. Pollution control

 

Diagnosis of the particulate filter

Electronic control of pollutant emissions

Control of the Lambda probe

 

4. Liaison to the ground

 

Electronic configuration of the size of tires,

Electronic configuration of tires (winter / summer),

Setting valves tire pressure

Diagnosis and management of shock-driven

Calibration of the sensor angle Driving (initialization of the steering angle)

 

5. Body

 

Implementation of safety airbags (lock / unlock)

Reconfiguration of a new calculator Airbag,

Diagnosis of calculators Airbag,

Rain sensor windshield (reading and erasing fault)

Test panel and activators of lights,

Setting Xenon headlights,

Rear radar

 

6. Post-Equipment

 

Setting up the radio,

Configuration loader CD,

Setting alarms

Configuration of the coupler,

Configuration bicycle loading system

 

7. Braking

 

Diagnosis of calculators ABS, ESP.

Diagnosis and unlock electric brakes.

Flush the brake system.

 

8. Motor

 

Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)

Programming of injectors

Electronic configuration of the EGR valve

 

9. Expert Mode

 

Diagnosis of advanced computers,

Configuration of comfort functions,

Change the language of the instrument panel,

physical measures (option with a probe - not supplied)

Direct access to all functions of diagnosis.

 

V2014.1 Multi Diag Access J2534 System Requirements:

 

*CPU: Pentium/Athlon 1.8 GHz or higher

*RAM: 256 MB of system memory

*Hard Drive: 10 GB of available space

*VCI (vehicle communication Interface)

*DVD-ROM

*No Internet, WIFI

*No Antivirus software