SPX AUTOBOSS OTC D730 Super Scanner Automotive Diagnostic Systems Update Online Support Multi-brand Vehicles

SPX AUTOBOSS OTC D730 Super Scanner 

OTC D730 AUTOMOTIVE DIAGNOSTIC SYSTEMS FOR ASIAN, Austra lian,EUROPEAN, AND AMERICAN VEHICLEs
1.Multi-language software including:
   English, Italian, German, French, Spanish,Russian, Polish and Turkish
2.Built In Printer
  
13 reasons to choose OTC D730:
1.Covers more than 50 vehicle makes
2.Access to powertrain, chassis and body systems
3.Quick Test function to test most vehicle systems
4.Fault codes (DTC’s), Data Stream and Service Reset
5.Actuations, Adaptations- and Control Module Coding
6.Supports Multi-language for an international marketplace
7.Frequent Internet based software updates
8.CAN Bus with high/low speed
9.One OBD II/EOBD connector for all CAN Bus systems
10.Demo Mode for many OEM’s
11.Data graphing
12.Self-check function
13.Multi-language software including:English, Italian, German, French, Spanish,Russian, Polish and Turkish
  
D730 SPECIFIC BENEFITS:
1.High resolution 7” VGA colour TFT touchscreen display
2.Windows CE operating system
3.Stand allowing hanging on steering wheel
4.Built In Printer
  
OTC D730 Systems Coverage:
Chassis :
SBC – Sensortronic Brake Control
ESP – Electronic Stability Program
AIRmatic – AIRmatic ABC
TPC – Tyre Pressure Monitor
ABS – SRS
Body:
Seats and Doors
Actual Values
Actuations
Initial Startup
Control Unit Adaptations
Correction Programming
Air Conditioning:
AAC – Automatic Air Conditioning
REAR AC – Rear Air Conditioning
STH – Stationary Heater
HSW – Heated Steering Wheel
Informatio n and Communication:
ICM – Instrument Cluster
SCM – Steering Column Module
PTS – Parktronic System
Audio, Video, Navigation
Telematics
Drive:
Transmission
ESM – Electronic Selector Module
DTR – Distronic
Motor Electronics
Idle Re-learn
Diesel Injector Coding
Diesel Pump Initialisation
DPF Regeneration
  
OTC D730 Diagnostic Coverage
European Vehicles :
Audi, BMW, Citroen, Fiat, Ford, Jaguar, Lancia, Land Rover,Mini, Mercedes-Benz, Opel, Peugeot, Porsche, Renault, Seat,Skoda, Smart, Volkswagen and Volvo
  
American Vehicles:
Chrysler, Ford and General Motors
  
Chinese Vehicles:
Chery, Foton, Geely and Great Wall
  
Asian Vehicles :
Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda,Mitsubishi, Nissan, SsangYong, Subaru, Suzuki and Toyota
  
AUSTRALIAN Vehicles :
Ford and Holden
  
OTC D730 Included Accessories:
Carrying case
100 – 240 volt power supply
SD card reader
Built-in printer kit
  
OTC D730 Vehicle Cable Complete Set:
OBD II adapters
European OBD I adapters
Australian OBDI adapters
Asian OBD I adapters
USA Domestic OBD I adapters
Chinese adapters

We can FREE added new cars for you (if you need leave message on order )

1.Australia NEW added the cars list :AU-FORD,AU-HOLDEN

2.Eurasian version
New cars software list:

The software show:

DA-ST512 Service Hand Held Device for Jaguar and Land Rover

The DA-ST512 can perform a vast number of applications using a simple menu structure. Example applications include SIR, EPBR, TM toggle, PDI, DTC Read & Clear, TTM Toggle, DPFAR and DPFDR. The DA-ST512 can also be used as a high-performance pass-thru (SAE J2534) vehicle interface with the same specification as our DAVINA product.
Want to able to do ALL quick Service operations on Jaguars (98 to date) and Land Rovers (2005 to date) plus Full diagnostics and Flash Programming when you want to, for a very small investment? Then look no further than the ST512.

This simple, cost effective hand tool (Fully Approved By JLR UK) will sort out all your Service issues on Jaguars and Land Rover vehicles. From a Service Reset or DPF Regeneration all the way to a complete vehicle diagnostic or ECU reflash (J2534 JLR subscription required) 

Attention: Please Do Not Connect DA-ST512 to Internet, OtherwiseDevice Will Be Locked.

ST512 Comes Loaded With the Following Applcations As Standard:

Key Features of DA-ST512:

Jaguar & Land Rover OEM approved device

ST512 operates as a standalone tool and comes loaded with the following applications:

Read and Clear Fault Codes on nearly ALL CAN bus ECUs (DTC)

Service Interval Reset (SIR)

Electronic Park Brake Reset (EPBR)

Diesel Particulate Filter Dynamic Regeneration (DPFDR)

Diesel Particulate Filter Adaption Rest (DPFDR)

Transport Mode toggle (TM)

Tight tolerance Mode Toggle (TTMT)

J2534 PASS THRU -Subscription based OEM JLR Diagnostics and Programming

These Additional Applications Can be Added at Addional Cost (SEE MAIN TEXT ABOVE):

Live Data Viewer

Pre-Delivery Inspection

Body Systems 

Alarm Trigger History 

Vehicle Reset

Vehicle Adaptions 

Brake Systems 

Suspension Height Calibration 

ARC Special Applications (Active Roll Control) 

Air Suspension Inflate/Deflate 

Transfer case 

Oil Level Measurement Application 

EOBD Scan Tool Application 

Injector coding 

Tyre Pressure Monitoring application 

Covers CAN, ISO9141, SCP vehicle networks

Jaguar and LandRover Vehicle Coverage:

MCT-200 Universal Motorcycle Scanner Support Multi-languages

Support motorcycle Model List:

HONDA,SYM,KYMCO,YAMAHA,PGO,SUZUKI,AEON,HARTFORD,KAWASAKI,VA,BENELLI,KTM.

MCT-200 Motocycle Scanner Support Protocol: K-line and CANBUS protocols

MCT-200 Motocycle Scanner Feature:

1. Retrieve ECU information
2. Display live data stream
3. Read fault codes
4. Clear fault codes
5. Component test
6. Special Function, such as: oil reset, ISC reset, CO adjustment etc
7. Support view waveforms and the numerical curve changes in data steam.

MCT-200 Motocycle Scanner Update:

 1. Update procedure is easy.

1) Connect the USB cable with PC, select "USB storage" option, the PC will detect the device as new flash disk.
2) Copy the update tool files to the disk, follow the tips to finish updating procedure. ( If your TF card can not be reset, please follow the tips to disconnect and connect power, then finish the updating procedure)

2. Device can be used as a USB flash disk

When connect USB cable with PC and select "USB storage" option,  the device can be used a USB flash disk which can save files based on your needs. Disable the flash disk on PC when finish using. The scanner will back to Main Menu automatically.

Replace TF Card and Battery

If the TF card is damaged or the battery is low, open the device back cover to replace.  Make sure the scanner is power off before replacing.

NOTE: MCT-200 Motorcycle scanner's TF card is FAT32 format. Please pay attention when formatting SD card. Otherwise the scanner will not work properly.

WABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic Interface

 WABCO DIAGNOSTIC KIT (WDI) 

A wide range of diagnostic hardware completes the System Diagnostics package: 
easy-to-use blink code plug, digital testers, conformity test unit, adapters and cables, and a complete test bench.

WABCO Diagnostic Software is available for every WABCO-produced component needing diagnosis:

ABS C
ABS D
ABS D+
ABS HPB
ABS SAE
ABS-EAPU
ATC CAN Standard
ATC Coach
ATC KWP Citaro Travego
CAN-Viewer
CDC
EBS 1C Asia
EBS BUS Standard
EBS CBU MAN
EBS EPB Bus
EBS EPB MB Truck
EBS Euro
ECAS 4x2 S2000
ECAS Bus A
ECAS Bus Citaro
ECAS CAN2
ECAS ENR MB Truck
ECAS Truck JED
ECAS Truck KWP K
HBS AddOn-E
IVTM
Modular AMT
MTS
ODR Tracker
OptiDrive (Fast Gear)
SmartBoard
TCE
TEBS-D
TEBS-E
TECAS
Trailer CAN Router-Repeater (TRR)
TrailerGUARD Telematics
VCS
VCS II
ZBR2

weight : 1.8kg net
size : 40cm x 17cm x 8cm 

Software screen

Smart Key Maker For Toyota G Chip and Lexus

Top 4 Reasons To Get Smart Key Maker For Toyota G Chip and Lexus

1. This is a 2 in 1 key programmer for Toyota G chip and Lexus smart card.

2. Toyota G Chip and Lexus Smart Key maker no need to install driver software for Toyota, Lexus programmer,
3. security, stability, fast, all with G key Toyota, Lexus Smart Key Programmer SO163 all lost, can be arbitrarily increased 1-3 keys.  
4. No need connect with computer

Notice: It cannot be updated
 

Instruction of How to Use Toyota G Chip and Lexus Smart Key maker

                                                                    

Please try to use ordinary programmer to read 93C66/93C46/93C86 data, save the following way operation.
                                                               
1. Remove the ECU security module, installed in the 93C66 eeprom IC programmer Toyota models corresponding to the transposition.

2. Connect the USB cable to the computer, and then switch to the features Toyota-G position, you can see the relative position of 93C66 the indicator light flashes slowly into the state.

3. Now click on the relative position of the touch switch, indicator light starts to flash at the moment, a few seconds after the light is off, the operation was successful.

4. Replace the 93C66 ECU security module, replace the vehicle anti-theft module is inserted after the first key, anti-theft module indicator light turns off remove the key, and then insert the second key, anti-theft module can be directly after indicator goes out to start the vehicle, completely not synchronous operation, convenient and quick. 

How To Use Lexus Key Programmer:

                                                                 

Note: a match one IC, regardless of the order, do not leave the key sensing area
1. The ECU IMMO module removed, the 93C46 eeprom IC programmer installed in Toyota models corresponding to the transposon

2.  Connect the USB cable to the computer, and then switch to Lexus Key functional position, you can see the relative position of 93C46 LED flashes slowly into the state, put the key into the induction circle

3.  Click on the relative position of the touch switch, indicator light starts to flash at the moment, a few seconds after the light is off, initialization is successful. Replace the eeprom IC EUC security module, replace the vehicle anti-theft module      

State: Z type machine simply IC pin cleaned with alcohol placed within the transposon, H-type machine choose the IC solder pads on the corresponding

Data Smart3+ Immo Full Package

Data Smart3+ powered by two CORTEX ARM cores, speeds up to 200MHZ., With SD card interface to load and save files, USB port for update by the Internet, 320*240 TFT LCD with 256K colors to show pictures and help files in great detail. Integrated CAN-BUS / J1850 / CCD-BUS / ISO9141 / SPI protocols in one multifunctional interface.

 

Data Smart3+ Features:

 

1. Self-test function integrated within the system.

2. Advanced operation environment, by extended menu and picture guidance.

3. Integrated data backup function to enable safe working procedure s.

4. Log-file function integrated in to soft ware; this will be a step forward in the tools operation and development.

5. Hex editor integrated in to software.

6. Advanced security integrated into hardware.

 

Immo Full Package:

 

Immo full package: Main hardware,Transponder adapter, OBD cables, USB cable, Power cables, with full soft.

software: OBD functions for Immo are all active.

Ford / Mazda: Key learning by OBD2 (not need code) for CAN-BUS cars.

 

4th Generation of VW Immo:

 

1. Make dealer keys by Megamos48 chip (using transponder adapter).

2. Key learning by OBD2 (not need code , not need online).

3. Cover all VW / SKADA / SEAT cars that use NEC+24C64 or NEC+24C32 or Micronas or 9s12xhz512(1M80F) MCU in dashboard.

 

4th Generation of AUDI Immo:

 

1. A6 / Q7 

2. A3 / TT / R8 07-UP

DASH Interface For BMW 2.1.0 Version

DASH Interface For BMW 2.1.0 Version

Features:

Connecting with all electronic control modules in the vehicle.
For all electronic control units reading identification data, sw/hw versions, user information fields.
For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.